 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
REXSTEP HI-TECH STEPPER MOTORS
Rexstep Motors stand out with their superior
power to weight ratio due to the square frame
design combined with the best materials and
most up-to-date processes in stepper technology.
All motors are 4-lead parallel configured,
2-phase, 1.8 degree step angle.
REXSTEP Hi-Torque Stepper Motors
$109.00 740 oz/in Model #RHT34-740
$115.00 Dual Shaft
$129.00 1200 oz/in Model #RHT34-1200
$135.00 Dual Shaft
Design Considerations
- Select a torque size with a 100% safety factor for torque output at given speeds.
- Do not set ramping speed faster than the motor's ability to accelerate load.
- Do not connect or disconnect motor unless system power is off.
- Do not use the motor's bearing to support drive screws in place of a proper bearing block.
- When direct driving a drive screw, select a coupler with shaft misalightment allowance.
- For best heat disappation, bolt motor to an aluminum mounting plate.
- Limit motor current to rated current per phase for smoother stepping operation.
- Do not disassemble the motor. This wil degrade torque output and step smoothness.
- Do not attempt to modify the shaft without first consulting us for guidelines.